Rotor knife right 50x49x10 Premium Line

Rotor knife RMNN0050-X0R from CUTMETALL for crushing machines.

Compatibility with machines:

Cutting performance and durability:

The cutting tool can be customised to the break down application, depending on the particular materials and varying shape.

The X-variation of this spare part is made of tool steel. The variant has a medium hardness and lays between the W- and Y-variants.

Here you are offered a good compromise between resistance to wear and toughness.

Due to the through-hardening process, there is a persistent hardness from the edge layer to the core. This ensures consistent wear over the service life of the rotor knife.

To avoid breakage and machine damage, it is crucial not to armour or weld on this type, as it will acutely weaken the structure.

Fastening in the machine:

The rotor knife is mounted right on the cutting device. The other parts of this set can be found under the accessories.

When attaching the rotor knife, please assure that it is only adapted to knife holders or knife crossbars with an undamaged contact surface in order to prevent breakage.

General characteristics:

This rotor knife is 50mm long, 49mm wide and 10mm high.

Its cutting edge is inclined at 40°.

This rotor knife belongs to the Premium Line, which is produced exclusively in Germany.