belt pulleys and accessories
from CUTMETALL - your spare parts specialist
In our wide range of products you will find various V-belt pulleys and accessories.
» Further information about the differences between the various V-belt pulleys can be found below the articles.
Filter
performance / version
performance / version
No entries found
65 Products
profile check template 8V for lock washers
Item No.: KSSCHAB-8V0
In Stock
Taper lock bushing 4040, bore Ø80
Item No.: TB4040-G80
In Stock
Taper lock bush 4545, bore Ø80
Item No.: TBLN4545-G80
In Stock
Taper lock bushing 5050, bore Ø100
Item No.: TBLN5050-G100
In Stock
V-belt pulley SPC 500, 10 grooves, version for use with taper bushing
Item No.: SPC50010
In Stock
V-belt pulley SPC Ø395, 10 grooves
Item No.: SVLN1043-100
In Stock
V-pulley Ø180, for 8 SPB ribs for taber socket 3020
Item No.: KS0180-8B9-3020
Delivery time on request
V-belt pulley SPC Ø250, 10 grooves, for use with taper bushing 4040
Item No.: KS0250-G10C9
Delivery time on request
V-belt pulley SPB Ø250, 6 grooves, version taper bushing 3525
Item No.: KS0250-G6B4-3525
Delivery time on request
V-belt pulley SPB Ø280, 6 grooves, version taper bushing 3525
Item No.: KS0280-6B9-5325
Delivery time on request
V-belt pulley SPC 290 / 10 grooves type 9
Item No.: KS0290-10C9-4040
Delivery time on request
V-belt pulley Ø315, 6x 8V grooves, version taper bushing 4545
Item No.: KS0315-G689
Delivery time on request
About hub V-belt pulleys and taper bush V-belt pulleys
Belt pulleys (also called hub pulleys) are important machine elements which are required in a V-belt drive. A V-belt or power belt is used to connect two shafts together. This type of pulley is often called a V-belt pulley or grooved pulley. Their material is usually grey cast iron, often referred to as GG-20 or EN-GJL 200.
There are three belt-pulley varieties- Solid disk: full material between hub and rim
- Bottom disk: Material between hub and rim turned out
- Arm disk: Material between hub and rim only webs
In contrast to taper V-belt pulleys, hub V-belt pulleys must be drilled and grooved separately.
Therefore a V-belt pulley for taper tension bushes is easier to handle and offers the following advantages:- the shaft/hub connection can be easily aligned
- the drive elements can be easily replaced as soon as the requirement changes
- one wedge disk can be used for many shaft diameters
All taper clamping bushes have a bore including keyway according to DIN. The keyway supports the entrainment of the disc by the shaft.
Want to learn more about our V-belt pulleys and taper bush V-belt pulleys?
CUTMETALL Products – Precision-fit. Durable. Efficient.At CUTMETALL we draw on decades of experience in the recycling industry to provide a dependable combination of quality, fit and service.
Our specialists support you in selecting suitable parts for your shredding or size-reduction tasks and offer practical application advice tailored to your setup and material stream.
Our spare and wear parts are CUTMETALL products - engineered for compatibility. They are not sourced from OEMs. The trademarks mentioned are the property of their respective owners. CUTMETALL is not commercially affiliated with these companies.
Didn’t find the part you were looking for? » Get in touch with us.