Stator knife 490x102x30 Premium Line 4 slots, edge 90°, 3xM12 threads, X-version

Stator knife SMZM0490-X01 from CUTMETALL for crushing machines from Zerma (Amis)

 

Compatibility with machines:

For cutting millses and granulators by the company Zerma (Amis) the stator knife is excellently applicable.

 

Cutting performance and durability:

The efficiency of this spare part depends predominantly on the variation of the material and cutting geometry.

In the X-version, the stator knife is made of tool steel, which is our standard variant in most break down applications. It is identified by a medium hardness.

Here you are offered a good compromise between insensitivity to wear and toughness.

Products of this option are hardened throughout, which means that this hardness remains persistent from the edge to the core. Due to that the wear is even in relation to its tool life.

We underline that this version should not be armoured or welded on. This has a negative effect on the material structure of the stator knife, which can subsequently lead to breakage and machine damage.

 

Fastening in the machine:

When fitting the stator knife, please assure that it is only attached to knife holders or knife crossbars with an undamaged contact surface, as otherwise breakage may occur.

 

General characteristics:

This stator knife is 490mm long, 102mm wide and 30mm high.

The inclination of the cutting edge is 90°.

As this stator knife belongs to the Premium Line, the item shown is manufactured exclusively in Germany.