Scraper 446x80x19 Premium Line 5 countersink, Ø17/Ø31 version 49, X-version

Scraper GMWA0446-XA0 by CUTMETALL for recycling machines by Wagner.

 

Compatibility with machines:

For crushers, shredders, pre-shredders and post-shredders by the manufacturer Wagner the scraper is perfectly fitting.

 

Cutting performance and durability:

The efficiency of the product depends predominantly on the version of the material and cutting geometry.

In the X-variation, this scraper is made of tool steel, which is our standard variant in most break down applications. It is identified by a medium hardness.

Here you are offered a good compromise between resistance to wear and toughness.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures consistent wear over the tool life of the scraper.

It is imperative to avoid the welding on or hardfacing of cutting tools of this option, as the structure will otherwise be severely weakened. Consequently, breakage and machine damage may occur.

 

Fastening in the machine:

The spare part is ideal for knives and also cutters with the length and width of 49mm. With regard to the various range of models, other configuration variations can be realised.

When installing, please also assure that the support of the scrapers is in a flat condition, as otherwise breakage may occur.

 

General characteristics:

This scraper is 446mm long, 80mm wide and 19mm high.

This scraper belongs to the Premium Line, which is manufactured exclusively in Germany.