Stator knife 995x100x22 Premium Line 8 slots, edges 75°, X-version
Stator knife SMZM0995-X00 from CUTMETALL for crushing machines from Zerma (Amis)
Compatibility with machines:
The stator knife is fitting for cutting millses and granulators from Zerma (Amis).
Cutting performance and durability:
The wear and tear behaviour and thus also the service life can be influenced by the material and the cutting geometry. This means that the performance can be well adjusted to the break down application.
This X-variant stator knife is made of tool steel and corresponds to the standard version in most application areas. Consequently, it has a medium hardness.
This combines both toughness and wear resistance in a balanced ratio.
Due to the through-hardening process, there is a consistent hardness from the edge layer to the core. This ensures uniform wear over the tool life of the stator knife.
It is imperative to avoid the welding on or hardfacing of cutting tools of this option, as the structure will otherwise be fundamentally weakened. Therefore, breakage and machine damage may occur.
General characteristics:
This stator knife is 995mm long, 100mm wide and 22mm high.
Its cutting edge is inclined at 75°.
As this stator knife belongs to our Premium Line, the component shown comes exclusively from German production.
| production line | Premium Line = knives Made in Germany |
| suitable to manufacturer | Zerma | AMIS, Amis | Zerma, Amis | Zerma |
| knife features | medium wear / medium toughness |
| article group | stator knife | bed knife | static knife |
| Länge | 995 |
| width | 100 |
| height | 22 |
| weight in kg | 14.54 |
| material | hardness | AISI D2 | DIN 1.2379 | 57-59 HRC |
