Stator knife 760x90x16 Premium Line 6 slots, edge 90°, 4x M8 threads, X-Variante

Stator knife SMHD0760-X00 from CUTMETALL for shredding machines from Herbold Meckesheim

 

Compatibility with machines:

This component is ideally fitting for cutting millses and granulators from Herbold Meckesheim.

 

Cutting performance and durability:

The item can be customised to the break down application, depending on the various materials and varying cutting shape.

This cutting tool presented is made of tool steel in the X-version, which is our standard variant for most areas of application. The hardness of this stator knife is in the medium range.

Here you are offered a beneficial compromise between resistance to wear and toughness.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures homogenous wear over the service life of the stator knife.

To avoid breakage and machine damage, it is important not to armour or weld on this type, as it will seriously weaken the structure.

 

Fastening in the machine:

When installing the stator knife, please assure that it is only fixed to knife holders or knife crossbars with an undamaged contact surface, as otherwise breakage may occur.

 

General characteristics:

The stator knife is 760mm long, 90mm wide and 16mm high.

Its cutting edge is inclined at 90°.

As this stator knife belongs to the Premium Line, the spare part shown is produced exclusively in Germany.