Stator knife 440x44x18 Premium Line edges 90°, 5 counter-sunk holes, X-version

Stator knife SMPV0440-X00 from CUTMETALL for crushing machines from Previero

 

Compatibility with machines:

This stator knife can be installed in the cutting mills and the granulator of the Previero company.

 

Cutting performance and durability:

Through the use of particular materials and varying the cutting shape, the spare part can be customised to the application area in terms of throughput and service life.

The X-variation of this item is made of tool steel. The cutting tool has a medium hardness and lays between the W- and Y-versions.

Here you are offered a beneficial compromise between insensitivity to wear and toughness.

Due to the through-hardening process, there is a consistent hardness from the edge layer to the core. This ensures uniform wear over the lifetime of the stator knife.

However, this version must not be armoured or welded on, as it negatively impacts the structure of the products. Subsequently, fractures and machine damage are possible.

 

General characteristics:

The dimensions of the component are 440mm in length, 44mm in width and 18mm in height.

Its cutting edge is inclined at 90°.

As this stator knife belongs to the Premium Line, the components presented is exclusively made in German manufacturing.