Knife 70x70x35 Primus-line M20 thread, X-version

Knife HMZN0070-XP00 from CUTMETALL for crushing machines from Zeno Zerkleinerungsmaschinen

 

Compatibility with machines:

The knife can be used for the crusher, the shredder, the pre-shredder and the post-shredder of the Zeno Zerkleinerungsmaschinen brand.

 

Cutting performance and durability:

This item can be adapted to the operational scenario, depending on the different materials and the variance in cutting shape.

The product shown is made of tool steel in the X-version, which is our standard variation for most operational scenarios. The hardness of this knife is in the medium range.

Here we offer you a suitable combination of insensitivity to wear and toughness at the same time.

In this variant, the items are hardened from the edge layer to the core. This means that the knife wears homogenously over its lifespan.

It is imperative to avoid the welding on or hardfacing of spare parts of this option, as the structure will otherwise be severely impaired. Therefore, breakage and machine damage may occur.

 

Fastening in the machine:

To attach the knife, the cutting tool to be fixed has a drilling for M20 threads.

When fitting the cutter, please ensure that it is only attached to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

 

General characteristics:

The measures of the knife are 70mm long, 70mm wide and 35mm high.

As the hardened cutting crown belongs to the Primus Line, this spare part is characterised by a special resistance to impurities.