Cutter 40x40x22 Premium Line M12 thread, X-version

Cutter HMWM0040-X03 from CUTMETALL for crushing machines from Weima Maschinenbau GmbH

 

Compatibility with machines:

The cutter can be fitted for Weima WL and Weima WLK series from the Weima Maschinenbau GmbH brand.

 

Cutting performance and durability:

The cutting geometry and the material used for constructing have a considerable effect on the insensitivity and longevity.

This product presented is made of tool steel in the X-version, which is our standard variant for most operational scenarios. The hardness of this cutter is in the medium range.

Here we offer you a suitable combination of resistance to wear and tear and toughness at the same time.

In this option, the products are hardened from the edge layer to the core. This means that the cutter wears evenly over its lifetime.

We underline that this variation should not be armoured or welded on. This has a negative impact on the material structure of the cutter, which can subsequently lead to breakage and machine damage.

 

Fastening in the machine:

For fastening, the cutter has a drilling for M12 threads.

It is imperative that the cutter is only affixed to knife holders or knife crossbars with flat supports, as otherwise the attachment may cause breakage.

 

General characteristics:

The measures of the cutter are 40mm long, 40mm wide and 22mm high.

As this cutter belongs to the Premium Line, the components is exclusively made in German manufacturing.