Rotor knife middle 320x90x20 Premium Line 3x long slots, edge 57°, Y-version
Rotor knife RMAP0320-Y001M from CUTMETALL for recycling machines from Hosokawa Alpine AG
Compatibility with machines:
For cutting millses by the producer Hosokawa Alpine AG the rotor knife is ideally suitable.
Cutting performance and durability:
The efficiency of the spare part depends largely on the variant of the material and cutting shape.
Knives made in this Y-version will extend the longevity of your product. Due to the hardness the susceptibility to impurities is higher, which makes it easier to fracture.
In this option, the spare parts are hardened from the edge layer to the core. This means that the rotor knife wears homogenously over its lifespan.
However, this version must not be armoured or welded on, as it negatively influences the structure of the items. Subsequently, fractures and machine damage are possible.
Fastening in the machine:
The rotor knife is mounted centered on the cutting device. The other parts of the set can be found under the accessories.
When attaching the rotor knife, please assure that it is only fixed to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.
General characteristics:
The following measures are available: 320mm length, 90mm width, 20mm height.
Its cutting edge is inclined at 57°.
This rotor knife belongs to the Premium Line, which is manufactured exclusively in Germany.
| production line | Premium Line = knives Made in Germany |
| suitable to manufacturer | Hosokawa Alpine AG |
| knife features | lower wear / lower toughness |
| article group | rotor knife | fly knife | flying knife |
| Länge | 320 |
| width | 90 |
| height | 20 |
| weight in kg | 3.76 |
| material | hardness | AISI D2 | DIN 1.2379 | 60-62 HRC |
