Rotor knife destra 210x90x20 Eco Line
Rotor knife RMAP0210-X0R-E from CUTMETALL for recycling machines from Hosokawa Alpine AG
Compatibility with machines:
This rotor knife is ideally applicable for cutting millses from Hosokawa Alpine AG.
Cutting performance and durability:
The shape and the material used for constructing have a considerable impact on the resistance and lifetime of the product.
The rotor knife is made of tool steel and is thus assigned to our X-variant, which is the standard option in most application areas.
This combines both toughness and wear insensitivity in a balanced ratio.
In this version, the items are hardened from the edge layer to the core. This means that the rotor knife wears steadily over its lifetime.
Hardfacing or welding on this variation should be avoided, as the structure will otherwise be acutely weakened. This can lead to breakages and machine damage.
Fastening in the machine:
The rotor knife is mounted right on the cutting device. The other parts of the set can be found under the accessories.
When installing, please also assure that the support of the knives is in a flat condition, as otherwise breakage may occur.
General characteristics:
The following measurements are available: 210mm length, 90mm width, 20mm height.
Its cutting edge is inclined at 7°/50°.
This Eco Line rotor knife is reliable, can get the job done and is also price-competitive in comparison to our Premium Line.
| production line | Eco Line = CUTMETALL foreign production |
| suitable to manufacturer | Hosokawa Alpine AG |
| knife features | medium wear / medium toughness |
| article group | rotor knife | fly knife | flying knife |
| length | 210 |
| width | 90 |
| height | 20 |
| weight in kg | 2.32 |
| material | hardness | Cr12MoV | 57-59 HRC |
