Rotor knife 770x100x22 Eco Line
Rotor knife RMHD0770-X04-E from CUTMETALL for shredding machines from Herbold Meckesheim
Compatibility with machines:
This spare part is ideally fitting for cutting millses from Herbold Meckesheim.
Cutting performance and durability:
The cutting geometry and the material used for constructing have a considerable influence on the resistance and service life.
In the X-variant, this rotor knife is made of tool steel, which is our standard version in most break down applications. It is characterised by a medium hardness.
Here we offer you an ideal combination of insensitivity to wear and tear and toughness at the same time.
Due to the through-hardening process, there is a persistent hardness from the edge layer to the core. This ensures consistent wear over the tool life of the rotor knife.
To avoid breakage and machine damage, it is important not to armour or weld on this type, as it will significantly weaken the structure.
General characteristics:
The rotor knife is 770mm long, 100mm wide and 22mm high.
Its cutting edge is inclined at 50°.
As the rotor knife is part of our Eco Line, this product is a cost-efficient alternative to the Premium Line.
| production line | Eco Line = CUTMETALL foreign production |
| suitable to manufacturer | Herbold Meckesheim GmbH |
| suitable to machine | Herbold SML 30/80 |
| knife features | medium wear / medium toughness |
| article group | rotor knife | fly knife | flying knife |
| length | 770 |
| width | 100 |
| height | 22 |
| weight in kg | 10.75 |
| material | hardness | Cr12MoV | 57-59 HRC |
