Rotor knife 600x98x24 Eco Line edge 20x1°(in front)/42°, 2x M12 threads

Rotor knife RMPV0600-X11-E by CUTMETALL for recycling machines by Previero.

 

Compatibility with machines:

The rotor knife is perfectly suitable for cutting millses from Previero.

 

Cutting performance and durability:

The wear behaviour and thus also the knife life can be impacted by the material and the cutting geometry. This means that the performance can be well configured to the application.

This item presented is made of tool steel in the X-option, which is our standard variation for most application areas. The hardness of this rotor knife is in the medium range.

Here you are offered a good compromise between insensitivity to wear and toughness.

Due to the through-hardening process, there is a persistent hardness from the edge layer to the core. This ensures homogenous wear over the service life of the rotor knife.

To avoid breakage and machine damage, it is crucial not to armour or weld on this type, as it will acutely weaken the structure.

 

Fastening in the machine:

When fitting the rotor knife, please ensure that it is only fixed to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

 

General characteristics:

The subsequent dimensions are available: 600mm length, 98mm width, 24mm height.

Its cutting edge is inclined at 1°/42°.

As part of our Eco Line, the rotor knife offers a lower-priced alternative to the Premium Line.