Rotor knife 500x98x24 Eco Line edge 42°, 2x M12 threads, X-version

Rotor knife RMPV0500-X03-E from CUTMETALL for recycling machines from Previero

 

Compatibility with machines:

The rotor knife is applicable for cutting millses from Previero.

 

Cutting performance and durability:

The wear and tear behaviour and thus also the longevity can be influenced by the material and the cutting geometry. This means that the performance can be well adapted to the application area.

This component presented is made of tool steel in the X-variant, which is our standard variation for most application scenarios. The hardness of this rotor knife is in the medium range.

Here you are offered a good compromise between insensitivity to wear and toughness.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures persistent wear over the service life of the rotor knife.

However, this version must not be armoured or welded on, as it negatively impacts the structure of the products. Subsequently, fractures and machine damage are possible.

 

Fastening in the machine:

When fitting the rotor knife, please ensure that it is only applied to knife holders or knife crossbars with a flat contact surface in order to prevent breakage.

 

General characteristics:

The item measures 500mm in length, 98mm in width and 24mm in height.

Its cutting edge is inclined at 42°.

As the rotor knife is part of our Eco Line, this product is a cost-efficient alternative to the Premium Line.