Rotor knife 400x88x24 Eco Line

Rotor knife RMDR0400-X0M-E by CUTMETALL for crushing machines by Dreher Maschinenbau.

 

Compatibility with machines:

This rotor knife is perfectly fitting for cutting millses from Dreher Maschinenbau.

 

Cutting performance and durability:

The shape and the material used for constructing have a considerable influence on the insensitivity and knife life.

This X-version rotor knife is made of tool steel and corresponds to the standard option in most application scenarios. Consequently, it has a medium hardness.

Here you are offered a good compromise between resistance to wear and toughness.

Cutting tools of this variation are hardened throughout, which means that this hardness remains persistent from the edge to the core. Due to that the wear is even in relation to its tool life.

To avoid breakage and machine damage, it is crucial not to armour or weld on this type, as it will severely weaken the structure.

 

Fastening in the machine:

The rotor knife is mounted centered on the cutting device. The other parts of the set can be found under the accessories.

When attaching the rotor knife, please assure that it is only attached to knife holders or knife crossbars with an intact contact surface, as otherwise breakage may occur.

 

General characteristics:

The measures of the cutting tool are 400mm in length, 88mm in width and 24mm in height.

Its cutting edge is inclined at 45°.

This favourable variant in comparison to our Premium Line is part of the Eco Line.