Rotor knife 398x95x20 Premium Line 2x long slots, edge 50°/35°, X-version

Rotor knife RMWN0398-X00 from CUTMETALL for crushing machines from Wanner Technik GmbH

 

Compatibility with machines:

This item is ideally fitting for cutting millses from Wanner Technik GmbH.

 

Cutting performance and durability:

This spare part can be customised to the break down application, depending on the particular materials and varying cutting geometry.

The rotor knife is made of tool steel and is thus assigned to our X-variant, which is the standard version in most areas of application.

Here you are offered a beneficial compromise between resistance to wear and toughness.

Cutting tools of this option are hardened throughout, which means that this hardness remains persistent from the edge to the core. Due to that the wear is homogenous in relation to its life span.

It is imperative to avoid the welding on or hardfacing of spare parts of this variation, as the structure will otherwise be severely impaired. Therefore, breakage and machine damage may occur.

 

General characteristics:

This rotor knife is 398mm long, 95mm wide and 20mm high.

Its cutting edge is inclined at 50°/35°.

As this rotor knife belongs to the Premium Line, the component shown is produced exclusively in Germany.