Detailed description
Knife HMLN0060-XPR by CUTMETALL for shredding machines by Lindner Recyclingtech.
Compatibility with machines:
The knife can be used for crushing machines of the Lindner Meteor model range from Lindner Recyclingtech.
Cutting performance and durability:
This product can be adapted to the area of application, depending on the particular materials and varying cutting geometry.
This X-variation knife is made of tool steel and corresponds to the standard version in most break down applications. Therefore, it has a medium hardness.
This combines both toughness and wear resistance in a balanced ratio.
In this option, the components are hardened from the edge layer to the core. This means that the knife wears homogenously over its lifetime.
To avoid breakage and machine damage, it is important not to armour or weld on this type, as it will fundamentally weaken the structure.
Fastening in the machine:
The knife is mounted right on the cutting device. The other parts of the set can be found under the accessories.
The cutting tool suits knives and cutting crowns with a length and width of 60mm. Due to the broad range of shredding models, further configuration options may be available.
It is imperative that the knife is only installed to knife holders or knife crossbars with ideal supports, as otherwise the attachment may cause breakage.
General characteristics:
The following dimensions are available: 60mm length, 60mm width, 27mm height.
Here we would like to underline the insensitivity to impurities of the item, as a component of the Primus Line, due to its hardening.
Field of application:
Depending on the recycling machine, the knife is suitable for the subsequent input:
- Substitute fuels
- Commercial & industrial waste
- Waste wood
- Bulky waste
- Foils
Feel free to contact us at any time if you are not sure about the exact application scenario. Building on our extensive knowledge of shredding machines, our CUTMETALL team will be happy to answer all of your questions!
Replacement and wear parts compatible with Lindner Recyclingtech machines – CUTMETALL quality
At CUTMETALL, your specialist for replacement and wear parts, you will find a comprehensive range of components compatible with shredders, granulators and size-reduction machines from Lindner Recyclingtech. Our experience enables us to offer suitable products for numerous Lindner Recyclingtech models. If you cannot find your specific model in our list, please contact us. Our team will be happy to assist you in selecting suitable components for your application.
About Lindner Recyclingtech
Lindner Recyclingtech was founded in 1948 and develops and manufactures machinery and systems for the size reduction and processing of various materials. The company is headquartered in Spittal an der Drau, Austria, and operates internationally. Its product portfolio includes solutions for a range of materials and applications, including municipal and commercial waste, plastics, wood, paper, metals and waste electrical and electronic equipment.
Lindner Recyclingtech system solutions
Lindner size-reduction machines are used for a variety of material-processing tasks. Depending on the application, single-stage or multi-stage processes can be used, for example in the processing of municipal and commercial waste and in the production of refuse-derived fuels. The machine portfolio includes pre-shredders such as the Lindner Jupiter and fine shredders such as the Lindner Komet.
CUTMETALL replacement parts compatible with your Lindner Recyclingtech machine
CUTMETALL offers replacement and wear parts compatible with Lindner Recyclingtech machines as well as technical expertise to support you in selecting suitable components, taking into account the operating conditions, service life and requirements of your equipment.
Why choose CUTMETALL?
- Wide product range: Whether you are looking for components for Lindner Jupiter, Komet, Polaris or other models, our range includes compatible parts for numerous machine types.
- Flexible measurement service: If a required part is not yet available in our range, we can measure the relevant replacement part directly on site, or you can send it to us for analysis.
- Detailed analysis in our own laboratory: In our laboratory, we determine the relevant dimensions and analyse the material of the replacement part in order to identify a suitable product variant for your equipment and application.
- Support for repeat sourcing: Once a component has been measured and analysed for your application, it can be added to our product range, making it easier to source the same component again when required.
Contact us to find out more about our products and services.
CUTMETALL Products – Precision-fit. Durable. Efficient.
With CUTMETALL, you benefit from decades of experience in the recycling industry as well as expertise in product quality, fit and technical service.
Our specialists will be happy to help you select suitable components for your specific size-reduction application, taking your equipment and material streams into account.
» Discover our range of compatible CUTMETALL parts for Lindner Recyclingtech machines.
Our spare and wear parts are CUTMETALL products - engineered for compatibility. They are not sourced from OEMs. The trademarks mentioned are the property of their respective owners. CUTMETALL is not commercially affiliated with these companies.
