Deflector wedge 485x100x28 Eco Line 4 slots 3xM16, Y-version

Deflector wedge SMHD0485-Y00-E by CUTMETALL for crushing machines by Herbold Meckesheim.

 

Compatibility with machines:

This deflector wedge is fitting for cutting millses from Herbold Meckesheim.

 

Cutting performance and durability:

The shape and the material used for constructing have a considerable impact on the insensitivity and product lifetime.

Deflector wedges made in this Y-version will extend the operating time of your product. Due to the hardness the susceptibility to impurities is higher, which makes it easier to fracture.

In this option, the cutting tools are hardened from the edge layer to the core. This means that the deflector wedge wears steadily over its lifetime.

However, this variant must not be armoured or welded on, as it negatively influences the structure of the spare parts. Consequently, fractures and machine damage are possible.

 

Fastening in the machine:

When attaching, please also ensure that the support of the deflector wedges is in an undamaged condition, as otherwise breakage may occur.

 

General characteristics:

The deflector wedge is 485mm long, 100mm wide and 28mm high.

This favourable option in comparison to our Premium Line is part of the Eco Line.