Cutter 40x40x20 Premium Line version 40, M12 thread, X-version

Cutter HMBO0040-X00 by CUTMETALL for crushing machines by BHS-Sonthofen GmbH.

 

Compatibility with machines:

The cutter is fitting for crushers, shredders and post-shredders from BHS-Sonthofen GmbH.

 

Cutting performance and durability:

The efficiency of the component depends predominantly on the version of the material and shape.

This X-variant cutter is made of tool steel and corresponds to the standard variation in most break down applications. Therefore, it has a medium hardness.

Here you are offered a balanced relationship between insensitivity to wear and toughness simultaneously.

Due to the through-hardening process, there is a persistent hardness from the edge layer to the core. This ensures uniform wear over the lifetime of the cutter.

Hardfacing or welding on this option should be avoided, as the structure will otherwise be acutely weakened. This can lead to breakages and machine damage.

 

Fastening in the machine:

To attach the cutter, the spare part to be adapted has a drilling for M12 threads.

This cutter can be used for knives and cutters with a length and width of 40mm. Due to the broad range of recycling machines, further configuration options are possible.

It is imperative that the cutter is only affixed to knife holders or knife crossbars with intact supports, as otherwise the attachment may cause breakage.

 

General characteristics:

This cutter is 40mm long, 40mm wide and 20mm high.

As this cutter belongs to the Premium Line, the product presented is produced exclusively in Germany.