Counter knife outside 509x96x28 Premium Line version 80, X-version

Counter knife GMVP0509-XV0A from CUTMETALL for crushing machines from Vecoplan

 

Compatibility with machines:

This counter knife can be inserted for the crusher, the shredder, the pre-shredder and the post-shredder of the Vecoplan company.

 

Cutting performance and durability:

The efficiency of the cutting tool depends predominantly on the variant of the material and cutting geometry.

The component shown is made of tool steel in the X-variation, which is our standard option for most application areas. The hardness of this counter knife is in the medium range.

Here you are offered a beneficial compromise between resistance to wear and toughness.

In this version, the cutting tools are hardened from the edge layer to the core. This means that the counter knife wears consistently over its lifespan.

We highlight that this option should not be armoured or welded on. This has a negative impact on the material structure of the counter knife, which can subsequently lead to breakage and machine damage.

 

Fastening in the machine:

The counter knife is mounted external on the cutting device. The other parts of this set can be found under the accessories.

This counter knife can be combined with knives and cutting crowns with a length and width of 80mm. Due to the broad range of models, other configuration options are possible.

When attaching the counter knife, please assure that it is only attached to knife holders or knife crossbars with an undamaged contact surface, as otherwise breakage may occur.

 

General characteristics:

The dimensions of the counter knife are 509mm long, 96mm wide and 28mm high.

As this counter knife belongs to the Premium Line, the product presented is exclusively made in German production.