Counter knife middle 429x98x28 Premium Line version 80, X-version

Counter knife GMVP0429-XV0M from CUTMETALL for crushing machines from Vecoplan

Compatibility with machines:

Cutting performance and durability:

The cutting geometry and the material used for constructing have a considerable influence on the resistance and product lifespan.

This spare part presented is made of tool steel in the X-variation, which is our standard option for most operational scenarios. The hardness of this counter knife is in the medium range.

This combines both toughness and wear insensitivity in a balanced ratio.

Spare parts of this variant are hardened throughout, which means that this hardness remains persistent from the edge to the core. Due to that the wear is homogenous in relation to its life cycle.

Hardfacing or welding on this version should be avoided, as the structure will otherwise be acutely weakened. This can lead to breakages and machine damage.

Fastening in the machine:

The counter knife is mounted centered on the cutting device. The other parts of this set can be found under the accessories.

The component fits knives and cutting crowns with a length and width of 80mm. Due to the wide range of shredding models, other configuration variations may be available.

When attaching the counter knife, please assure that it is only applied to knife holders or knife crossbars with an undamaged contact surface in order to prevent breakage.

General characteristics:

The subsequent dimensions are available: 429mm length, 98.1mm width, 28mm height.

As this counter knife belongs to the Premium Line, the product shown is produced exclusively in Germany.