Counter knife middle 410x97x29 Premium Line version 80, X-version

Counter knife GMVP0389-XVFM by CUTMETALL for shredding machines by Vecoplan.

 

Compatibility with machines:

The counter knife can be installed in the crusher, the shredder, the pre-shredder and the post-shredder of the Vecoplan brand.

 

Cutting performance and durability:

The cutting geometry and the material used for constructing have a considerable impact on the insensitivity and product lifespan.

This X-variant counter knife is made of tool steel and corresponds to the standard variation in most areas of application. Consequently, it has a medium hardness.

This combines both toughness and wear resistance in a balanced ratio.

In this option, the spare parts are hardened from the edge layer to the core. This means that the counter knife wears consistently over its lifetime.

However, this version must not be armoured or welded on, as it negatively impacts the structure of the cutting tools. Subsequently, fractures and machine damage are possible.

 

Fastening in the machine:

The counter knife is mounted centered on the cutting device. The other parts of the set can be found under the accessories.

This product suits knives and cutting crowns with a length and width of 60mm. Due to the wide range of models, further configuration options may be available.

When attaching the counter knife, please assure that it is only adapted to knife holders or knife crossbars with a flat contact surface in order to prevent breakage.

 

General characteristics:

The counter knife is 389mm long, 115.64mm wide and 25mm high.

This counter knife belongs to the Premium Line, which is manufactured exclusively in Germany.