Counter knife middle 387x95x25 Premium Line version 40, X-version

Counter knife GMVP1996-X0M from CUTMETALL for crushing machines from Vecoplan

Compatibility with machines:

Cutting performance and durability:

The cutting geometry and the material used for constructing have a considerable impact on the insensitivity and knife life.

The counter knife is made of tool steel and is thus assigned to our X-variant, which is the standard version in most application areas.

This combines both toughness and wear resistance in a balanced ratio.

In this option, the spare parts are hardened from the edge layer to the core. This means that the counter knife wears steadily over its lifespan.

However, this version must not be armoured or welded on, as it negatively impacts the structure of the products. Consequently, fractures and machine damage are possible.

Fastening in the machine:

The counter knife is mounted centered on the cutting device. The other parts of the set can be found under the accessories.

This item is applicable for knives and also cutters with the length and width of 40mm. With regard to the various range of models, further configuration options can be realised.

When fitting the counter knife, please assure that it is only adapted to knife holders or knife crossbars with an ideal contact surface in order to prevent breakage.

General characteristics:

The dimensions of the counter knife are 387mm long, 95mm wide and 25mm high.

As part of the Premium Line, this counter knife is of German production.