Counter knife left side 474x99x30 Eco Line version 40, X-version

Counter knife GMWM0474-X1L-E from CUTMETALL for crushing machines from Weima Maschinenbau GmbH

 

Compatibility with machines:

This counter knife can be inserted for the crusher, the shredder, the pre-shredder and the post-shredder of the Weima Maschinenbau GmbH brand.

 

Cutting performance and durability:

The efficiency of the product depends largely on the variant of the material and shape.

In the X-version, this counter knife is made of tool steel, which is our standard option in most applications. It is defined by a medium hardness.

Here we offer you a suitable combination of insensitivity to wear and toughness at the same time.

Cutting tools of this variation are hardened throughout, which means that this hardness remains persistent from the edge to the core. Due to that the wear is homogenous in relation to its life span.

However, this option must not be armoured or welded on, as it negatively impacts the structure of the components. Subsequently, fractures and machine damage are possible.

 

Fastening in the machine:

The counter knife is mounted left on the cutting device. The other parts of the set can be found under the accessories.

The spare part fits knives and cutting crowns with a length and width of 40mm. Due to the wide range of shredding models, further configuration variants may be available.

It is imperative that the counter knife is only affixed to knife holders or knife crossbars with intact supports, as otherwise the attachment may cause breakage.

 

General characteristics:

This cutting tool measures 474mm in length, 99mm in width and 30mm in height.

This favourable version in comparison to our Premium Line is part of the Eco Line.