Counter knife externally 293x118.5x28 Premium Line version 40, X-version

Counter knife GMBO0293-X0A by CUTMETALL for recycling machines by BHS-Sonthofen GmbH.

 

Compatibility with machines:

For crushers, shredders, pre-shredders and post-shredders by the producer BHS-Sonthofen GmbH the counter knife is perfectly applicable.

 

Cutting performance and durability:

The product can be configured to the break down application, depending on the particular materials and varying cutting shape.

This X-variation counter knife is made of tool steel and corresponds to the standard variant in most application scenarios. Therefore, it has a medium hardness.

This combines both toughness and wear insensitivity in a balanced ratio.

Spare parts of this version are hardened throughout, which means that this hardness remains the same from the edge to the core. Due to that the wear is even in relation to its tool life.

Hardfacing or welding on this option should be avoided, as the structure will otherwise be fundamentally weakened. This can lead to breakages and machine damage.

 

Fastening in the machine:

The counter knife is mounted external on the cutting device. The other parts of the set can be found under the accessories.

This cutting tool fits knives and cutters with a length and width of 40mm. Due to the broad range of shredding machines, other configuration variants may be available.

It is imperative that the counter knife is only affixed to knife holders or knife crossbars with intact supports, as otherwise the attachment may cause breakage.

 

General characteristics:

The following measures are available: 293mm length, 118.5mm width, 28mm height.

This counter knife belongs to the Premium Line, which is produced exclusively in Germany.