Counter knife externally 245x180x60 Eco Line

Counter knife GMUT0245-94A-E from CUTMETALL for shredding machines from Untha

 

Compatibility with machines:

For crushers, shredders, pre-shredders and post-shredders by the company Untha the counter knife is ideally suitable.

 

Cutting performance and durability:

The efficiency of this spare part depends chiefly on the variant of the material and cutting shape.

The W9-option wears faster than the X-version, but also has increased toughness and is resistant to impurities. However, the hardness of the W9-variation is lower than that of the X-variation.

In this version, the spare parts are hardened from the edge layer to the core. This means that the counter knife wears steadily over its lifespan.

It is imperative to avoid the welding on or hardfacing of cutting tools of this option, as the structure will otherwise be severely weakened. Therefore, breakage and machine damage may occur.

 

Fastening in the machine:

The counter knife is mounted external on the cutting device. The other parts of the set can be found under the accessories.

This counter knife can be used for knives and cutters with a length and width of 130mm. Due to the broad range of models, other configuration variants are possible.

It is imperative that the counter knife is only affixed to knife holders or knife crossbars with intact supports, as otherwise the attachment may cause breakage.

 

General characteristics:

The item measures 245mm in length, 180mm in width and 60mm in height.

Since the counter knife is part of our Eco Line, the cutting tool offers a favourable alternative to the Premium Line.