Counter knife 5-piece 2489x188x42 Premium Line version 70, W9-version

Counter knife GMZN2489-90K by CUTMETALL for crushing machines by Zeno Zerkleinerungsmaschinen.

Compatibility with machines:

Cutting performance and durability:

This product can be configured to the area of application, depending on the different materials and the variance in cutting geometry.

Comparatively, the W9-option is softer than the X-version. Additionally, the W9-variant wears also faster. On the other hand, it has the advantage of increased toughness and is also resistant to impurities.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures persistent wear over the service life of the counter knife.

Hardfacing or welding on this variation should be avoided, as the structure will otherwise be seriously weakened. This can lead to breakages and machine damage.

Fastening in the machine:

The item is sold as a whole set, consisting of 5 parts.

The cutting tool is ideal for knives and also cutters with the length and width of 70mm. With regard to the various range of models, further configuration options can be realised.

It is imperative that the counter knife is only installed to knife holders or knife crossbars with intact supports, as otherwise the attachment may cause breakage.

General characteristics:

The measurements of the counter knife are 2485mm long, 188mm wide and 42mm high.

As part of the Premium Line, this counter knife is manufactured in Germany.