Counter knife 2-piece 1706x110x39 Premium Line version 40, X-version

Counter knife GMHD1706-X0K from CUTMETALL for recycling machines from Herbold Meckesheim

 

Compatibility with machines:

This product is excellently applicable for crushers, shredders, pre-shredders, and post-shredders from Herbold Meckesheim.

 

Cutting performance and durability:

The performance of this spare part depends predominantly on the version of the material and cutting geometry.

In the X-option, the counter knife is made of tool steel, which is our standard variation in most applications. It is defined by a medium hardness.

Here we offer you an ideal combination of insensitivity to wear and toughness at the same time.

In this variant, the cutting tools are hardened from the edge layer to the core. This means that the counter knife wears consistently over its lifetime.

However, this variant must not be armoured or welded on, as it negatively impacts the structure of the products. Consequently, fractures and machine damage are possible.

 

Fastening in the machine:

The counter knife will be sold as a set of 2 parts.

This counter knife can be used for knives and cutters with a length and width of 40mm. Due to the broad range of models, other configuration options are possible.

When attaching, please also assure that the support of the knives is in an undamaged condition, as otherwise breakage may occur.

 

General characteristics:

The following dimensions are available: 1705mm length, 109.9mm width, 39.4mm height.

As this counter knife belongs to our Premium Line, the cutting tool presented comes exclusively from German production.