Combing knife 345x176x37, PremiumCut, version 43, W9 version

Scraper GMLN0345-907 from CUTMETALL for shredding machines from Lindner Recyclingtech

Compatibility with machines:

Cutting performance and durability:

The performance of this cutting tool depends chiefly on the version of the material and cutting geometry.

The W9-option wears more rapidly than the X-variation, but also has increased toughness and is insensitive to impurities. However, the hardness of the W9-variant is lower than that of the X-variation.

Components of this option are hardened throughout, which means that this hardness remains the same from the edge to the core. Due to that the wear is homogenous in relation to its life cycle.

To avoid breakage and machine damage, it is important not to armour or weld on this type, as it will significantly weaken the structure.

Fastening in the machine:

The item is suitable for knives and also cutters with the length and width of 43mm. With regard to the diverse range of models, further configuration variants can be realised.

It is imperative that the scraper is only affixed to knife holders or knife crossbars with ideal supports, as otherwise the attachment may cause breakage.

General characteristics:

This component measures 344.5mm in length, 176mm in width and 37mm in height.

As this scraper belongs to the Premium Line, the spare part presented is produced exclusively in Germany.

Field of application:

In addition to a broad range of break down applications, the scraper can be used for the following materials:

• Substitute fuels
• Domestic waste
• Bulky waste
• Foils
• Plastic
• Files & data carriers
• Paper

Do you have questions about which spare can be used for your special application area? Feel free to contact us at any time! Your CUTMETALL team will be happy to answer all your questions.

Replacement and wear parts compatible with Lindner Recyclingtech machines – CUTMETALL quality

At CUTMETALL, your specialist for replacement and wear parts, you will find a comprehensive range of components compatible with shredders, granulators and size-reduction machines from Lindner Recyclingtech. Our experience enables us to offer suitable products for numerous Lindner Recyclingtech models. If you cannot find your specific model in our list, please contact us. Our team will be happy to assist you in selecting suitable components for your application.

About Lindner Recyclingtech

Lindner Recyclingtech was founded in 1948 and develops and manufactures machinery and systems for the size reduction and processing of various materials. The company is headquartered in Spittal an der Drau, Austria, and operates internationally. Its product portfolio includes solutions for a range of materials and applications, including municipal and commercial waste, plastics, wood, paper, metals and waste electrical and electronic equipment.

Lindner Recyclingtech system solutions

Lindner size-reduction machines are used for a variety of material-processing tasks. Depending on the application, single-stage or multi-stage processes can be used, for example in the processing of municipal and commercial waste and in the production of refuse-derived fuels. The machine portfolio includes pre-shredders such as the Lindner Jupiter and fine shredders such as the Lindner Komet.

CUTMETALL replacement parts compatible with your Lindner Recyclingtech machine

CUTMETALL offers replacement and wear parts compatible with Lindner Recyclingtech machines as well as technical expertise to support you in selecting suitable components, taking into account the operating conditions, service life and requirements of your equipment.

Why choose CUTMETALL?

• Wide product range: Whether you are looking for components for Lindner Jupiter, Komet, Polaris or other models, our range includes compatible parts for numerous machine types.
• Flexible measurement service: If a required part is not yet available in our range, we can measure the relevant replacement part directly on site, or you can send it to us for analysis.
• Detailed analysis in our own laboratory: In our laboratory, we determine the relevant dimensions and analyse the material of the replacement part in order to identify a suitable product variant for your equipment and application.
• Support for repeat sourcing: Once a component has been measured and analysed for your application, it can be added to our product range, making it easier to source the same component again when required.

Contact us to find out more about our products and services.

CUTMETALL Products – Precision-fit. Durable. Efficient.
With CUTMETALL, you benefit from decades of experience in the recycling industry as well as expertise in product quality, fit and technical service.

Our specialists will be happy to help you select suitable components for your specific size-reduction application, taking your equipment and material streams into account.

» Discover our range of compatible CUTMETALL parts for Lindner Recyclingtech machines.

Our spare and wear parts are CUTMETALL products - engineered for compatibility. They are not sourced from OEMs. The trademarks mentioned are the property of their respective owners. CUTMETALL is not commercially affiliated with these companies.