Center counter knife 409x130x28 PremiumCut, version 80, X version

Counter knife GMVP0409-XVF1M from CUTMETALL for crushing machines from Vecoplan

 

Compatibility with machines:

The counter knife is fitting for crushers, shredders, pre-shredders and post-shredders from Vecoplan.

 

Cutting performance and durability:

The cutting shape and the material used for constructing have a considerable influence on the insensitivity and lifetime of the product.

This cutting tool shown is made of tool steel in the X-version, which is our standard variation for most application areas. The hardness of this counter knife is in the medium range.

This combines both toughness and wear resistance in a balanced ratio.

In this variant, the spare parts are hardened from the edge layer to the core. This means that the counter knife wears consistently over its lifetime.

However, this option must not be armoured or welded on, as it negatively influences the structure of the components. Subsequently, fractures and machine damage are possible.

 

Fastening in the machine:

The counter knife is mounted centered on the cutting device. The other parts of this set can be found under the accessories.

The component fits knives and cutting crowns with a length and width of 80mm. Due to the wide range of models, further configuration variants may be available.

When attaching the counter knife, please ensure that it is only attached to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

 

General characteristics:

The subsequent measurements are available: 409mm length, 130mm width, 28mm height.

As this counter knife belongs to the Premium Line, the item presented is produced exclusively in Germany.

 

Field of application:

In addition to a broad variety of utilizations, this spare part is perfect for recycling the following materials:

• Subsitute fuels
• Commercial & industrial waste
• Domestic waste
• Plastic
• Files & data carriers
• Paper
• Spitting materials

 

Feel free to contact us at any time if you are not sure about the exact application scenario. Building on our extensive knowledge of shredding machines, our CUTMETALL team will be happy to answer all of your questions!

Replacement and wear parts compatible with Vecoplan machines – CUTMETALL quality

At CUTMETALL, your specialist for replacement and wear parts, you will find a comprehensive range of compatible components for shredders, chippers and size-reduction machines from Vecoplan. Our experience enables us to offer suitable products for many Vecoplan models. If you cannot find your specific model in our list, please contact us. Our team will be happy to assist you in identifying suitable components for your application.

About Vecoplan

Vecoplan AG is an internationally active company serving the wood, waste and recycling industries and develops, manufactures and distributes machinery for material processing. Founded in Bad Marienberg in 1969, the company offers machinery and systems for a range of industrial processing applications. Its headquarters and technology centre are located at its original site in Bad Marienberg.

Vecoplan technologies

Vecoplan machines are used for the size reduction and processing of a wide range of input materials. Its product portfolio includes solutions for materials such as wood, biomass, plastics and data carriers and is used in various recycling and material-processing applications.

CUTMETALL – your specialist for replacement parts compatible with Vecoplan machines

CUTMETALL offers replacement and wear parts compatible with Vecoplan machines as well as technical expertise to support you in selecting components with regard to the operating conditions, service life and performance requirements of your equipment.

Why choose CUTMETALL?

• Wide product range: Whether you are looking for components for Vecoplan VAZ, VEZ, VIZ, Hurricane or other models, our range includes compatible parts for numerous machine types.
• Flexible measurement service: If a required part is not yet available in our range, we can measure the relevant replacement part directly on site, or you can send it to us for analysis.
• Detailed analysis in our own laboratory: In our laboratory, we determine the relevant dimensions and analyse the material of the replacement part in order to identify a suitable product variant for your equipment and application.
• Support for repeat sourcing: Once a part has been measured and analysed for your application, it can be added to our product range, making it easier to source the same component again when required.

Contact us to find out more about our products and services.

CUTMETALL Products – Precision-fit. Durable. Efficient.
With CUTMETALL, you benefit from decades of experience in the recycling industry as well as expertise in product quality, fit and technical service.

Our specialists will be happy to help you select suitable components for your specific size-reduction application, taking your equipment and material streams into account.

» Discover our range of compatible CUTMETALL parts for Vecoplan machines.

Our spare and wear parts are CUTMETALL products - engineered for compatibility. They are not sourced from OEMs. The trademarks mentioned are the property of their respective owners. CUTMETALL is not commercially affiliated with these companies.