Messer 172x57x28 Premium Line
Unsere Ersatzteile sind keine Originalteile der Maschinenhersteller, sondern prozessoptimierte CUTMETALL Eigenmarken:
Passgenau. Langlebig. Wirtschaftlich.
- X-Variante = Standardausführung für dieses Messer
- für Sechskantschraube (DIN 931)
- keine Muttern mehr notwendig
- keine Verletzungsgefahr mehr durch scharfkantige Schraubenköpfe
- Sondervariante von Cutmetall
- diese Messer können auf dem Rotor und Stator verwendet werden
Wichtiger Hinweis: Die Auflagefläche des Messers muss eben bzw. plan sein um Messerbrüche zu vermeiden. Bitte beachten Sie das die Senkkopfschrauben mit Nase nicht mehr verwendet werden können.
Dieser Artikel gehört zu der Rubrik der Blockmesser und der übergeordneten Kategorie der Rotormesser und Statormesser:
Blockmesser gehören zu den Kernkompetenzen von CutMetall und sind je nach Anwendung in verschiedenen Stahlvariationen, Härtegraden und Geometrien erhältlich.
Chopper HMLN0172-XM16 from CUTMETALL for shredding machines from Lindner Recyclingtech
Compatibility with machines:
- Lindner Komet
- Lindner Komet HP
- Lindner Power Komet / Komet PK
- Lindner Power Komet HP / Komet PK HP
Cutting performance and durability:
The wear behaviour and thus also the knife life can be influenced by the material and the cutting geometry. This means that the efficiency can be well configured to the application area.
This item presented is made of tool steel in the X-version, which is our standard option for most operational scenarios. The hardness of this chopper is in the medium range.
Here you are offered a balanced relationship between resistance to wear and toughness simultaneously.
In this variant, the spare parts are hardened from the edge layer to the core. This means that the chopper wears evenly over its lifespan.
However, this version must not be armoured or welded on, as it negatively influences the structure of the products. Subsequently, fractures and machine damage are possible.
Fastening in the machine:
When installing, please also ensure that the support of the choppers is in a flat condition, as otherwise breakage may occur.
General characteristics:
The chopper is 172mm long, 57mm wide and 28mm high.
As this chopper belongs to the Premium Line, the spare part shown is produced exclusively in Germany.
Field of application:
Depending on the machine, the chopper is suitable for the subsequent input:
- Substitute fuels
- Commercial & industrial waste
- Domestic waste
- Waste wood
- Foils
Do you have questions about which component can be used for your special application area? Feel free to contact us at any time! Your CUTMETALL team will be delighted to answer all your questions.
| Produktlinie | Premium Line = Messer Made in Germany |
| Passend für Hersteller | Lindner Recyclingtech |
| Passend für Modell | Lindner Komet 2800, Lindner Komet, Lindner Power Komet / Komet PK, Lindner Power Komet HP / Komet PK HP, Lindner Komet HP, Lindner Power Komet 1800, Lindner Komet 2200 HP, Lindner Power Komet 2200 HP, Lindner Power Komet 2800, Lindner Power Komet 2200, Lindner Power Komet 2800 HP, Lindner Komet 1800, Lindner Komet 1800 (A), Lindner Komet, Lindner Power Komet / Komet PK, Lindner Power Komet HP / Komet PK HP, Lindner Komet HP, Lindner Power Komet 1800, Lindner Komet 2200 HP, Lindner Power Komet 2200 HP, Lindner Power Komet 2800, Lindner Power Komet 2200, Lindner Power Komet 2800 HP, Lindner Komet 1800, Lindner Komet 1800 (A) |
| Messereigenschaften | mittlerer Verschleiß / mittlere Zähigkeit |
| Artikelgruppe | Messer | Hackmesser, Blockmesser, Blockmesser |
| Länge | 172 |
| Breite | 57 |
| Höhe | 28 |
| Gewicht in Kg | 2.08 |
| Werkstoff | Härte | DIN 1.2379 | AISI D2 | 57-59 HRC |
